Título
Simulación y experimentación de laminación plana de placas de aluminio 6063
Autor(es)
Revista
Nexo Revista Científica
Volumen
24(1)
Abstract
An experimental methodology was generated for understanding the theoretical and practical concepts inherent to cold flat rolling. Aluminium slabs about 100 mm length, 9 mm thickness with different widths: 10 and 30 mm were rolled. A constant 0.3 mm thickness reduction step was performed in order to achieve a thickness reduction greater than 80 %. In the Abaqus® commercial software, a mathematical model was implemented in order to obtain a greater understanding concerning how the process variables affect the fields of stresses and strains that are not observed experimentally. It was found, by mathematical simulation, that a superficial hardening in the plates was produced and the deformation obtained is heterogeneous, which is corroborated physically.
Fecha
2011-06-10